Marble wire saw, full name "Diamond wire multi-wire cutting machine", is a large-scale stone multi-wire cutting machine, suitable for sawing and processing natural stone and artificial granite. Cutting is achieved by unidirectional or reciprocating motion of diamond wire. Compared with traditional gang saws, the sawing seam is narrower and the material yield is higher.
(1) Fast speed, high economic benefits, can cut hundreds of wafers at a time.
(2) Low cutting loss, small crystal defect depth.
(3) High processing accuracy, few geometric defects (TTV, bow, deviation, etc.).
(4) Suitable for cutting hard, brittle or difficult to cut materials.
(5) Low energy consumption, power saving, less pollution, and less cutting loss.
1. The maximum operating cutting line cutting speed is 2400M/min, and the acceleration and deceleration time is 3 seconds.
2. Support the common DC bus (capacitor box) solution to achieve a redundant solution without disconnection in the event of abnormal power outages in the power grid, and improve the stable and efficient operation of the system.
3. Water-cooled high-performance motor solution. The maximum motor speed supports 4000 rpm, the maximum inertia is 4000kg.cm2, and the integrated motor solution can be customized.
4. The system integrates a dual system solution of marble wire saw and rope saw, which can be switched according to the type of stone being cut, supports 100 recipe combinations and storage, historical curves, and remote cloud function control.
Address : Room 804, 8F, Building 1, Runzhi R&D Center, No. 5 Runfang Road, Block 70, Xingdong Community, Xin'an Sub-district, Bao'an District, Shenzhen
Tel : 027-87002560
Fax : 86-0755-86267216
Email : info@sineedrive.comCpyright © 2023 Shenzhen Sinee Electric Co.,Ltd. A certain ICP preparation No. 00000000-0
