EM600\660 series
High-Performance Vector Control Inverter
Three-phase 380~415V 0.75~560kW
Three-phase 660~690V 18.5~220kW
The EM600 series inverter is a high-performance vector control inverter launched by SINEE. It supports three-phase AC asynchronous motors and permanent magnet synchronous
motors; drive control technologies, such as the improved vector VF control technology (VVF), speed sensorless vector control technology (SVC) and speed sensor vector control
technology (FVC); speed output and torque output; expansions such as I/O expansion cards, communication bus expansion cards and PG cards.
The EM600 series high-performance vector inverter
has the following features:
1、High torque control accuracy
2、Wide speed range and high control accuracy
3、Low-frequency carrier: VVF/1Hz/150%,
SVC/0.25Hz/150%FVC/0Hz/150%
4、Support I/O expansion
5、Support communication bus expansion: 485 bus, Profibus-DP network, CANopen network;
6、Support various encoders: ABZ incremental, UVW incremental, UVW wire saver and rotary transformer.
7、Built-in DC reactor above 11kW to increase the power factor and enhance the product reliability;
| Item | Specification | |
| Power supply | Rated voltage of power supply (400V) | 380V-20%~415V+20% |
| Rated output current (690V) | 660V-15%~690V+10% | |
| Rated voltage and frequency | 50-60Hz ± 5%; voltage unbalance rate:<3% | |
| Output | Maximum output voltage | The maximum output voltage is the same as the input power voltage |
| Rated output current | Continuous output of 100% rated current | |
| Maximum overload current | 150% rated current: 60s; 180% rated current: 10s; 200% rated current: 2s | |
| Basic control | Driving mode | V/F control (VVF)； Speed sensorless vector control (SVC)； Speed sensor vector control (FVC) |
| Input mode | Frequency (speed) input, torque input | |
| Start and stop control mode | Keyboard, control terminal (two-line control and three-line control), communication | |
| Frequency control range | 0.00～600.00Hz | |
| Input frequency resolution | Digital input: 0.01Hz Analog input: 0.1% of maximum frequency | |
| Speed control range | 1:50（VVF）、1:200（SVC）、1:1000（FVC） | |
| Speed control accuracy | Rated synchronous speed ± 0.2% | |
| Acceleration and deceleration time | 0.01 s to 600.00 s / 0.1 s to 6,000.0 s / 1 s to 60,000 s | |
| Voltage/frequency characteristics | Rated output voltage: 20% to 100%, adjustable; fundamental frequency: 1Hz to 600Hz, adjustable | |
| Torque boost | Fixed torque boost curve, any V/F curve optional | |
| Starting torque | 150%/1Hz（VVF）、150%/0.25Hz（SVC）、150%/0Hz（FVC） | |
| Torque control accuracy | ±8% rated torque (SVC), ±5% rated torque (FVC) | |
| Self-adjustment of output voltage | When the input voltage changes, the output voltage will basically remain unchanged | |
| Automatic current limit | Output current is automatically limited to avoid frequent overcurrent trips | |
| DC braking | Braking frequency: 0.01 to maximum frequency Braking time: 0～30S Braking current: 0% to 100% of rated current | |
| Signal input source | Communication, multi-speed, analog, high-speed pulse, etc | |
| Input and output | Reference power supply | 10V/20mA |
| Terminal control power | 24V/200mA | |
| Digital input terminal | 7 (standard X1 to X7) + 4 (extension card X8 to X11) digital multi-function inputs: X7 can be used as a high-speed pulse input terminal (F02.06 = 35/38/40); The remaining 10 channels (X1 to X6 and X8 to X11) can only be used as ordinary digital input terminals. | |
| Analog input terminal | 3 (standard AI1 to AI3) + 1 (extension card AI4) analog inputs: One (AI1) voltage source: 0 to 10V input; Two (AI2/AI3): 0 to 10V input voltage or 0 to 20mA input current optional; One (AI4) voltage source: -10V to 10V input | |
| Digital output terminal | 2 (standard Y1/Y2) + 1 (extension card Y3) open-collector multi-function outputs and 2 (R1: EA/EB/EC and R2:RA/RB/RC) relay multi-function outputs. Maximum output current of the collector: 50mA; relay contact capacity: 250VAC/3A or 30VDC/1A, with EA-EC and RA-RC normally open and EB-EC and RB-RC normally closed | |
| Analog output terminal | Two (M1/M2) multi-function analog output terminals, with output of 0 to 10V or 0 to 20mA | |
| Operation panel | LED display | The LED digital tube displays relevant information about the inverter |
| Parameter copying | Parameter settings of the inverter can be uploaded and downloaded for fast parameter copying | |
| Protection | Protective Function | Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheat, overspeed, load loss, external fault, etc. |
| Use conditions | Location | Indoor, at an altitude of less than 1 km, free of dust, corrosive gases and direct sunlight |
| Applicable environment | -10℃ to +40℃, 20% to 90%RH (non-condensing) | |
| Vibration | Less than 0.5g | |
| Storage environment | -25℃～+65℃ | |
| Installation method | Wall-mounted, floor-standing electrical control cabinet, through-wall | |
| Protection level | Protection level | Standard IP20/IP21 (450kW and above) |
| Cooling method | Cooling method | Forced air cooling |
| Rated Voltage | Model | Motor Power (kW) | Rated Output Current (A) |
| 3-phase, 380 – 415 VAC | EM600-0R7-3B | 0.75 | 2.5 |
| EM600-1R5-3B | 1.5 | 4.2 | |
| EM600-0R7-3B | 0.75 | 2.5 | |
| EM600-1R5-3B | 1.5 | 4.2 | |
| EM600-2R2-3B | 2.2 | 5.6 | |
| EM600-4R0-3B | 4 | 9.4 | |
| EM600-5R5-3B | 5.5 | 13 | |
| EM600-7R5-3B | 7.5 | 17 | |
| EM600-011-3B | 11 | 25 | |
| EM600-015-3B | 15 | 32 | |
| EM600-018-3B | 18.5 | 38 | |
| EM600-022-3/3B | 22 | 45 | |
| EM600-030-3/3B | 30 | 60 | |
| EM600-037-3/3B | 37 | 75 | |
| EM600-045-3/3B | 45 | 90 | |
| EM600-055-3/3B | 55 | 110 | |
| EM600-075-3/3B | 75 | 150 | |
| EM600-090-3 | 90 | 176 | |
| EM600-110-3 | 110 | 210 | |
| EM600-132-3 | 132 | 253 | |
| EM600-160-3 | 160 | 304 | |
| EM600-185-3 | 185 | 357 | |
| EM600-200-3 | 200 | 380 | |
| EM600-220-3 | 220 | 426 | |
| EM600-250-3 | 250 | 465 | |
| EM600-280-3 | 280 | 520 | |
| EM600-315-3 | 315 | 585 | |
| EM600-355-3 | 355 | 650 | |
| EM600-400-3 | 400 | 725 | |
| EM600-450-3 | 450 | 820 | |
| EM600-500-3 | 500 | 900 | |
| EM600-560-3 | 560 | 1010 | |
| 3-phase, 660 – 690 VAC | EM600-160-6 160 175 | 160 | 175 |
| EM600-185-6 185 198 | 185 | 198 | |
| EM600-200-6 200 221 | 200 | 221 | |
| EM600-220-6 220 235 | 220 | 235 |
| Model No. | W | W1/W2 | H | H1 | H2 | D | D1 | D2 | d | Frame |
| EM600-0R7-3B | 130 | 115/120 | 228 | 220 | 219 | 153 | 108 | 75 | 5 | (b) |
| EM600-1R5-3B | ||||||||||
| EM600-2R2-3B | ||||||||||
| EM600-4R0-3B | ||||||||||
| EM600-5R5-3B | 140 | 130 | 270 | 261 | 258 | 172 | 128 | 94 | 5 | |
| EM600-7R5-3B | ||||||||||
| EM600-011-3B | 180 | 150 | 368 | 353 | 343 | 210 | 165 | 136 | 7 | |
| EM600-015-3B | ||||||||||
| EM600-018-3B | ||||||||||
| EM600-022-3/3B | 250 | 200 | 484 | 470 | 440 | 222 | 150 | - | 6.5 | (c) |
| EM600-030-3/3B | ||||||||||
| EM600-037-3/3B | ||||||||||
| EM600-045-3/3B | 315 | 200 | 560 | 546 | 513 | 250 | 180 | - | 7 | |
| EM600-055-3/3B | 350 | 250 | 662 | 638 | 603 | 262 | 188 | - | 12 | |
| EM600-075-3/3B | ||||||||||
| EM600-090-3 | 386 | 300 | 753 | 724 | 700 | 292 | 231 | 300 | 13 | (d) |
| EM600-110-3 | 416 | 300 | 855 | 825 | 793 | 307 | 246 | 315 | 13 | |
| EM600-132-3 | ||||||||||
| EM600-160-3 | 497 | 397 | 1107 | 1076 | 1036 | 340 | 285 | 348 | 13 | |
| EM600-185-3 | ||||||||||
| EM600-200-3 | ||||||||||
| EM600-220-3 | 656 | 450 | 1348 | 1314 | 1261 | 388 | 232 | 395 | 13 | |
| EM600-250-3 | ||||||||||
| EM600-280-3 | ||||||||||
| EM600-315-3 | 801 | 680 | 1417 | 1383 | 1330 | 388 | 190 | 395 | 13 | |
| EM600-355-3 | ||||||||||
| EM600-400-3 | ||||||||||
| EM600-450-3 | 1000 | 920 | 1800 | 1645 | - | 600 | 520 | 450 | 17 | (e) |
| EM600-500-3 | ||||||||||
| EM600-560-3 | ||||||||||
| EM600-160-6 | 397 | 397 | 1107 | 1076 | 1036 | 340 | 285 | 348 | 13 | (d) |
| EM600-185-6 | ||||||||||
| EM600-200-6 | ||||||||||
| EM600-220-6 |
Address : Floor 5, Building 7, Antuoshan High-tech Industrial Park, Sha'er Community, Shajing Street, Bao'an District, Shenzhen, China
Tel : 027-87002560
Fax : 86-0755-86267216
Email : info@sineedrive.comCpyright © 2023 Shenzhen Sinee Electric Co.,Ltd. A certain ICP preparation No. 00000000-0
