Note:EM760 frequency converter has performed well since its launch and has been recognized by customers.
Due to the company's product planning upgrade, the EM760 machine has been proven by the market
and can now completely replace the EM500 and EM303B series products.
Therefore, the company decided to delist the EM500 and EM303B series products.
Click here to chooose EM760:https://www.sineedrive.com/Variable-Frequency-Drives/vector-inverter
And EM730 replaces EM560.
EM730:https://www.sineedrive.com/Variable-Frequency-Drives/general-inverter
EM500\560 Series
High-Performance Vector Control Inverter
Three-phase 380~415V 0.75~630kW
The EM500 series inverter is an open-loop vector control inverter. It supports the three-phase AC asynchronous motor;
a variety of drive control technologies: improved vector VF control technology (VVF), speed sensorless vector control technology (SVC);
speed output and torque output; expansions: I/O expansion cards, and communication bus expansion cards.
The EM500 series high-performance vector inverter has the following features:
1.High torque control accuracy
2.Wide speed range and high control accuracy
3.Low-frequency carrier: VVF/1Hz/150%, SVC/0.25Hz/150%
4.Support I/O expansion
5.Support communication bus expansion: 485 bus, Profibus-DP network, CANopen network;
6.Built-in DC reactor above 11kW to increase the power factor and enhance the product reliability;
7.Support a variety of dedicated functions: constant-pressure water supply, air compressor, torque winding and unwinding, straight wire-drawing machine, etc.
| Item | Specification | |
| Power supply | Rated voltage of power supply | 380V-20%~415V+20% |
| Rated voltage and frequency of power supply | 50-60Hz ± 5%; voltage unbalance rate:<3% | |
| Output | Maximum output voltage | The maximum output voltage is the same as the input power voltage. |
| Rated output current | Continuous output of 100% rated current | |
| Maximum overload current | G model: 150% rated current: 60s; 180% rated current: 10s; 200% rated current: 2s P model: 120% rated current: 60s; 150% rated current: 10s; 180% rated current: 2s | |
| Basic control | Driving mode | V/F control (VVF); speed sensorless vector control (SVC) |
| Input mode | Frequency (speed) input, torque input | |
| Start and stop control mode | Keyboard, control terminal (two-line control and three-line control), communication | |
| Frequency control range | 0.00～600.00Hz/0.0～3000.0Hz | |
| Input frequency resolution | Digital input: 0.01Hz/0.1Hz Analog input: 0.1% of maximum frequency | |
| Speed control range | 1:50（VVF）、1:200（SVC） | |
| Speed control accuracy | Rated synchronous speed ± 0.2% | |
| Acceleration and deceleration time | 0.01 s to 600.00 s / 0.1 s to 6,000.0 s / 1 s to 60,000 s | |
| Voltage/frequency characteristics | Rated output voltage: 20% to 100%, adjustable; fundamental frequency: 1Hz to 600Hz/3000Hz, adjustable | |
| Torque boost | Fixed torque boost curve, any V/F curve optional | |
| Starting torque | 150%/1Hz（VVF）、150%/0.25Hz（SVC） | |
| Torque control accuracy | ±8% rated torque (SVC) | |
| Self-adjustment of output voltage | When the input voltage changes, the output voltage will basically remain unchanged. | |
| Automatic current limit | Output current is automatically limited to avoid frequent overcurrent trips. | |
| DC braking | Braking frequency: 0.01 to maximum frequency Braking time: 0～30S Braking current: 0% to 100% of rated current | |
| Signal input source | Communication, multi-speed, analog, high-speed pulse, etc. | |
| Input and output | Reference power supply | 10V/20mA |
| Terminal control power | 24V/200mA | |
| Digital input terminal | 7 (standard X1 to X7) + 4 (extension card X8 to X11) digital multi-function inputs: X7 can be used as a high-speed pulse input terminal (F02.06 = 35/38/40); The remaining 10 channels (X1 to X6 and X8 to X11) can only be used as ordinary digital input terminals | |
| Analog input terminal | 3 (standard AI1 to AI3) + 1 (extension card AI4) analog inputs: One (AI1) voltage source: 0 to 10V input Two (AI2/AI3): 0 to 10V input voltage or 0 to 20mA input current optional; One (AI4) voltage source: -10V to 10V input | |
| Digital output terminal | 2 (standard Y1/Y2) + 1 (extension card Y3) open-collector multi-function outputs and 2 (R1: EA/EB/EC and R2:RA/RB/RC) relay multi-function outputs. Maximum output current of the collector: 50mA; relay contact capacity: 250VAC/3A or 30VDC/1A, with EA-EC and RA-RC normally open and EB-EC and RB-RC normally closed | |
| Analog output terminal | Two (M1/M2) 0-10V/ 0-20mA multi-function analog output terminals | |
| Operation panel | LED display | The LED digital tube displays relevant information about the inverter. |
| Parameter copying | Parameter settings of the inverter can be uploaded and downloaded for fast parameter copying. | |
| Protection | Protective Function | Short circuit, overcurrent, overvoltage, undervoltage, phase loss, overload, overheat, overspeed, load loss, external fault, etc. |
| Use conditions | Location | Indoor, at an altitude of less than 1 km, free of dust, corrosive gases and direct sunlight |
| Applicable environment | -10℃ to +40℃, 20% to 90%RH (non-condensing) | |
| Vibration | Less than 0.5g | |
| Storage environment | -25℃～+65℃ | |
| Installation method | Wall-mounted, floor-standing electrical control cabinet, through-wall | |
| Protection level | Protection level | Standard IP20/IP21 (450kW and above) |
| Cooling method | Cooling method | Forced air cooling |
| Rated voltage of power supply | Model | Applicable motor power (kW) | Rated output current (A) |
| 3-phase, 380 - 415V | EM500-0R7G/1R5P-3B | 0.75/1.5 | 2.5/4.2 |
| EM500-1R5G/2R2P-3B | 1.5/2.2 | 4.2/5.6 | |
| EM500-2R2G/3R0P-3B | 2.2/3.0 | 5.6/7.2 | |
| EM500-4R0G/5R5P-3B | 4.0/5.5 | 9.4/12 | |
| EM500-5R5G/7R5P-3B | 5.5/7.5 | 13/17 | |
| EM500-7R5G/9R0P-3B | 7.5/9 | 17/20 | |
| EM500-011G/015P-3B | 11.0/15.0 | 25/32 | |
| EM500-015G/018P-3B | 15/18.5 | 32/38 | |
| EM500-018G/022P-3B | 18.5/22 | 38/44 | |
| EM500-022G/030P-3/3B | 22/30 | 45/59 | |
| EM500-030G/037P-3/3B | 30/37 | 60/73 | |
| EM500-037G/045P-3/3B | 37/45 | 75/87 | |
| EM500-045G/055P-3/3B | 45/55 | 90/106 | |
| EM500-055G/075P-3/3B | 55/75 | 110/145 | |
| EM500-075G/090P-3/3B | 75/90 | 150/169 | |
| EM500-090G/110P-3 | 90/110 | 176/208 | |
| EM500-110G/132P-3 | 110/132 | 210/248 | |
| EM500-132G/160P-3 | 132/160 | 253/298 | |
| EM500-160G/185P-3 | 160/185 | 304/350 | |
| EM500-185G/200P-3 | 185/200 | 357/372 | |
| EM500-200G/220P-3 | 200/220 | 380/410 | |
| EM500-220G/250P-3 | 220/250 | 426/456 | |
| EM500-250G/280P-3 | 250/280 | 465/510 | |
| EM500-280G/315P-3 | 280/315 | 520/573 | |
| EM500-315G/355P-3 | 315/355 | 585/640 | |
| EM500-355G/400P-3 | 355/400 | 650/715 | |
| EM500-400G/450P-3 | 400/450 | 725/810 | |
| EM500-450G/500P-3 | 450/500 | 820/900 | |
| EM500-500G/560P-3 | 500/560 | 900/1010 | |
| EM500-560G/630P-3 | 560/630 | 1010/1140 | |
| 3-phase, 220～230V | EM500-0R7G/1R5P-2B | 0.75/1.5 | 4.8/8.0 |
| EM500-1R5G/2R2P-2B | 1.5/2.2 | 8.0/10.0 | |
| EM500-2R2G/3R0P-2B | 2.2/3.0 | 10.0/13.0 | |
| Single-phase 220～230V | EM500-0R7G/1R5P-1B | 0.75/1.5 | 4.8/8.0 |
| EM500-1R5G/2R2P-1B | 1.5/2.2 | 8.0/10.0 | |
| EM500-2R2G/3R0P-1B | 2.2/3.0 | 10.0/13.0 |
| Model No. | W | W1/W2 | H | H1 | H2 | D | D1 | D2 | d | Frame |
| EM500-0R7G/1R5P-1B/ 2B/3B | 130 | 115/120 | 228 | 220 | 219 | 153 | 108 | 75 | 5 | (b) |
| EM500-1R5G/2R2P-1B/ 2B/3B | ||||||||||
| EM500-2R2G/3R0P-1B/ 2B/3B | ||||||||||
| EM500-4R0G/5R5P-3B | ||||||||||
| EM500-5R5G/7R5P-3B | 140 | 130 | 270 | 261 | 258 | 172 | 128 | 94 | 5 | |
| EM500-7R5G/9R0P-3B | ||||||||||
| EM500-011G/015P-3B | 180 | 150 | 368 | 353 | 343 | 210 | 165 | 136 | 7 | |
| EM500-015G/018P-3B | ||||||||||
| EM500-018G/022P-3B | ||||||||||
| EM500-022G/030P-3/3B | 250 | 200 | 484 | 470 | 440 | 222 | 150 | - | 6.5 | (c) |
| EM500-030G/037P-3/3B | ||||||||||
| EM500-037G/045P-3/3B | ||||||||||
| EM500-045G/055P-3/3B | 315 | 200 | 560 | 546 | 513 | 250 | 180 | - | 7 | |
| EM500-055G/075P-3/3B | 350 | 250 | 662 | 638 | 603 | 262 | 188 | - | 12 | |
| EM500-075G/905P-3/3B | ||||||||||
| EM500-090G/110P-3 | 386 | 300 | 753 | 724 | 700 | 292 | 231 | 300 | 13 | (d) |
| EM500-110G/132P-3 | 416 | 300 | 855 | 825 | 793 | 307 | 246 | 315 | 13 | |
| EM500-132G/160P-3 | ||||||||||
| EM500-160G/185P-3 | 497 | 397 | 1107 | 1076 | 1036 | 340 | 285 | 348 | 13 | |
| EM500-185G/200P-3 | ||||||||||
| EM500-200G/220P-3 | ||||||||||
| EM500-220G/250P-3 | 656 | 450 | 1348 | 1314 | 1261 | 388 | 232 | 395 | 13 | |
| EM500-250G/280P-3 | ||||||||||
| EM500-280G/315P-3 | ||||||||||
| EM500-315G/355P-3 | 801 | 680 | 1417 | 1383 | 1330 | 388 | 190 | 395 | 13 | |
| EM500-355G/400P-3 | ||||||||||
| EM500-400G/450P-3 | ||||||||||
| EM500-450G/500P-3 | 1000 | 920 | 1800 | 1645 | - | 600 | 520 | 450 | 17 | (e) |
| EM500-500G/560P-3 | ||||||||||
| EM500-560G/630P-3 |
Address : Floor 5, Building 7, Antuoshan High-tech Industrial Park, Sha'er Community, Shajing Street, Bao'an District, Shenzhen, China
Tel : 027-87002560
Fax : 86-0755-86267216
Email : info@sineedrive.comCpyright © 2023 Shenzhen Sinee Electric Co.,Ltd. A certain ICP preparation No. 00000000-0
